CWX 15Q 3 way Automated Water Ball Valves for Commercial Industrial and Sanitary Applications

CWX-15Q 2-way & 3-way Automated Ball Valves for Commercial, Industrial, and Sanitary Applications     Electric Actuated Ball Valves 1/2" Stainless Steel 110 VAC New

Stainless Steel Motorized Ball Valve specifications:

• 120 Volt
• 2-way
• Housing Material ABS Body/Ball/Stem CPVC
• 316 Stainless Steel Valve
• 1/2", 3/4", and 1" NPT (Female)
• Seal EPDM
• Rating IP67
• Seat PTFE
• Max Power 5 W
• Max Torque 2 Nm
• 2 wires normally closed function
• Visual indicator and manual override
• 100000 times service life. 
• Maximum Pressure 232 psi
• Max Delta P is 100 psi
• Ambient Temp -4F to 113F (-20C to 45C)
• Maximum Temperature 140F (60 C)
• Current 25 +/- 5 mA
• To fully close Running Time 5 t0 7 seconds
• Open amp; close time: 3 to 5 seconds. Anti water hammer slow close function. Without costly and bulky spring return actuator, the valve will normally close by the way of built in capacitor when power off
• Max Temperature: 100 C (212 F)
• Very low working current, can be suitable for battery operating.
• Small amp; compact design, very suitable for small equipment.
• To guarantee the best working performance, charge the valve for 60 seconds when you first use the valve.

The mini 3-way motorized ball valve design as an economical alternative to solenoid valves for use in popular applications: 

• High fouling heating & cooling water systems 
• Different water control system
• Water recycling
• Water purification
• Water treatment. 
• Center heating & cooling water system
• HVAC
• Automated leak detection 
• Water shut off system electric brewing system
• Solar heating systems
• Campus IC card systems
• Water saving systems 
• Automatic irrigation
• Water purification & filtration systems
• Sprinkle systems