electric control water valve with position indicator and manual override function for replacing solenoids valve

Stainless Steel Motorized Ball Valve

electric control valve with position indicator and manual override function for replacing solenoids valve

Stainless Steel Motorized Ball Valve specifications:

• 120 Volt
• 2-way
• Housing Material ABS Body/Ball/Stem CPVC
• 316 Stainless Steel Valve
• 1/2", 3/4", and 1" NPT (Female)
• Seal EPDM
• Rating IP67
• Seat PTFE
• Max Power 5 W
• Max Torque 2 Nm
• 2 wires normally closed function
• Visual indicator and manual override
• 100000 times service life. 
• Maximum Pressure 232 psi
• Max Delta P is 100 psi
• Ambient Temp -4F to 113F (-20C to 45C)
• Maximum Temperature 140F (60 C)
• Current 25 +/- 5 mA
• To fully close Running Time 5 t0 7 seconds
• Open amp; close time: 3 to 5 seconds. Anti water hammer slow close function. Without costly and bulky spring return actuator, the valve will normally close by the way of built in capacitor when power off
• Max Temperature: 100 C (212 F)
• Very low working current, can be suitable for battery operating.
• Small amp; compact design, very suitable for small equipment.
• To guarantee the best working performance, charge the valve for 60 seconds when you first use the valve.

The mini 2 -way motorized ball valve design as an economical alternative to solenoid valves for use in popular applications: 

• High fouling heating & cooling water systems 
• Different water control system
• Water recycling
• Water purification
• Water treatment. 
• Center heating & cooling water system
• HVAC
• Automated leak detection 
• Water shut off system electric brewing system
• Solar heating systems
• Campus IC card systems
• Water saving systems 
• Automatic irrigation
• Water purification & filtration systems
• Sprinkle systems